- Remove loose dirt and dust in advance with a vacuum, broom or mop, then damp-wipe the surface with LOBA CleanFix or Cleaner. Stubborn dirt or care product residue must be removed in advance by stripping the surface. Please note the relevant product's technical information when doing this.
- Shake the contents well.
- Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.
- Follow the care instructions according to the area of application.
- The application of a maintenance layer can change the properties and/or gloss level. Test certificates for slip resistance and suitability for sports floors must be observed.
Thinner / Mixing
The product is ready for use and must not be reduced!
Application tool / application rate
LOBA spray can, trowel or cloth / 10-20 ml/m² (50-100m²/l) polish up manually or by machine after drying for example with LOBASAND NormalPad white.
Drying time
Application:
Newly laid multi-layer elementsfreshly oiled and waxed flooring, as well as flooring impregnated with hard wax/oil, should be cleaned until it is dust-free (brush, vacuum). Apply NatureWax in an even, thin layer with a lint-free cloth or sponge and then polish when dry.
Clean flooring with sticky soiling using a damp mop and LOBA ParkettSoap. Once completely dry, apply NatureWax and polish.
Worn floors with traces of usecan be prepared with a thorough cleaning using LOBA Cleaner or LOBA ParkettSoap, and if necessary with mechanical equalisation using a slightly abrasive LOBASAND SpecialPad (beige/green). Once completely dry, apply NatureWax and polish.
Larger areascan be treated using the SprayCleaner method. Apply NatureWax by spraying it on and equalising it by machine (single-disc machine with LOBASAND SpecialPad white).
Contact
