- Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.
- Shake the contents well.
- Remove loose dirt and dust in advance with a vacuum, broom or mop, then damp-wipe the surface with LOBA CleanFix or Cleaner. Stubborn dirt or care product residue must be removed in advance by stripping the surface. Please note the relevant product's technical information when doing this.
- Follow the care instructions according to the area of application.
- The application of a maintenance layer can change the properties and/or gloss level. Test certificates for slip resistance and suitability for sports floors must be observed.
Thinner / Mixing
The product is ready for use and must not be reduced!
Application tool / application rate
LOBA Wischwiesel, spray can or cloth / 10-30 ml/m² (30-100m²/l).
Drying time
- Careful use possible after 4-6 hours.
- Full traffic capability and coverage after 12 hours.
Application:
Newly laid, freshly oiled floorsmust be cleaned so they are dust-free (brush, vacuum). Apply ParkettOil evenly with a lint-free cloth or LOBA Wischwiesel. Equalise any excess and avoid puddle formation.
Flooring with sticky soiling can be cleaned by applying LOBA ParkettSoap with a wet mop. After drying completely, apply ParkettOil.
Worn floors with traces of usecan be prepared with a thorough cleaning using LOBA Cleaner or LOBA ParkettSoap, and if necessary with mechanical equalisation using a slightly abrasive LOBASAND SpecialPad (beige/green). After drying completely, apply ParkettOil.
For more serious damage,treatment with an impregnating oil may be necessary. We provide information about this in the LOBA care instructions for oiled wooden flooring.
Larger areascan be treated using the SprayCleaner method. Apply ParkettOil by spraying it on and equalising it by machine (single-disc machine with LOBASAND SpecialPad white).
On non-absorbent substratese.g. newly laid or barely used parquet flooring that has been UV-oiled at the factor, the care oil cannot penetrate the wood, leading to wetting problems and/or delayed drying. To care for these types of flooring, LOBA Permanent OilCare, for example, can be used as an alternative.Important information
Keep soaked cloths, pads and other tools in closed containers. Moisten oil in combination with sanding dust, fabric cloths and so on with water or store in a sealable bucket and dispose of in a fire-safe manner, since otherwise there is a risk of self-ignition.
Contact
