• For professional use only!
• BEFORE USING, READ AND UNDERSTAND ALL LABEL INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS.
• For technical advice call our Loba-Wakol Technical Service at 1-800.230.6456.
• Recommended climate conditions are 55°F-80°F/40-75%rH.
• Sand and prepare floors according to NWFA guidelines.
• WARNING! If you scrape, sand, or remove old paint from wood floors, you may release lead dust. Follow local and/or federal requirements for lead removal. Before you start, find out how to protect yourself and others by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
• ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY, APPEARANCE, AND DESIRED RESULTS.
• Shake material well before use.
• Do not thin. Do not add water.
• Do not apply at temperatures below 55°F (13°C). Make sure material is at room temperature. Always maintain adequate ventilation during all phases of the coating and drying process.
• Do not use dust from the belt/drum sander (big machine). Use fine dust from edger or multi-head sander.
• Mix EasyFill with the finest wood dust available from sanding into a smooth trowelable consistency. Fine dust will be easier to trowel, fill gaps/voids better, and will also provide better adhesion in the joints. Trowel-fill the complete floor before the final sanding. Repeat procedure on larger joints or damaged areas after the first application is fully dry.
• Completely sand all dried material from the surface during your final sanding phase.

Application Tool

LOBA trowel

Coverage

On newly installed hardwood floors with small gaps approx. 500-800 square feet per gallon

Drying time

• • On newly installed hardwood floors sandable after 15-30 minutes, at renovations with extremely wide joints let dry over night.
  • It is possible to apply LOBA water-based & LOBA oil systems as soon as 1 hour after application of Loba EasyFill.

Recommended Procedure for wood floors:

• Sand to your medium grit sanding sequequence.
• Trowel-fill with EasyFill
• Allow to dry 20-40 min.
• Final Cut
• Apply surface treatment according to Technical Data Sheet of the product.
  Tip: An ideal color result is achieved at a mixing ratio of 1:10 by weight or 2:5 by volume (sanding dust content to binder).

Coloring of dark wood species:

The coloring of dark woods can be improved by adding Mixol universal tinting pigment. Pour 1 Gal. of LOBA EasyFill into a bucket, add 200 ml max. of MIXOL and stir with a paint mixer to a uniform consistency. In order to avoid color deviations, always mix enough for each layer of finish.

Mixol 23 - Dark Brown For dark wood types like: smoked oak, wenge, pangapanga
Mixol 20 - Chestnut For reddish wood species such as: jatoba, merbau, mahogany

Suitable product combinations

Possible surface treatment with:

Any Water-based LOBA finish system or any LOBA oil system, without limitation.

Screen and Recoat

• Do NOT use EasyFill on Factory Finished or Manually Finished Floors.
• Only apply to raw wood.
• EasyFill must be coated with LOBA water-based sealers, finishes, or LOBA oil systems.

For professional use only!

Compatibility

When this product is used in combination with other LOBA products the technical information of these products must be followed. Refer to the Technical Data Sheets. LOBA cannot guarantee the suitability of products other than LOBA or the bond of the existing coating to the substrate.