- BEFORE USING, READ AND UNDERSTAND ALL LABEL INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS.
- For technical advice call our Loba-Wakol Technical Service at 1-800.230.6456.
- Recommended conditions are 50°F-80°F/40-65%rH.
- ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY, APPEARANCE, AND DESIRED RESULTS.
- Shake material well before use.
- Do not thin. Do not add water.
- Do not apply at temperatures below 55°F (13°C). Make sure material is at room temperature. Always maintain adequate ventilation during all phases of the coating and drying process.
- Apply evenly at the recommended coverage rate. Avoid streaks, puddles, and lap marks.
Application Tool
Lint free cotton clothLOBA trowelLOBA Wischwiesel
Coverage
800-1,000 square feet per 1 quart bottle.
Drying time
- Work in sections and level immediately, within 15 minutes at the latest.
- Slightly stressable after 4-6 hours.
- Fully stressable after 12 hours.
PreparationClean floor thoroughly with LOBA ParkettSoap. If necessary, use a single disc machine and slightly abrasive LOBASAND Specialpads (beige/green).
Application:Apply the material thinly with a lint-free cloth and completely remove the excess within 15 minutes.
Alternatively, apply the material thinly in sections and over the entire surface with a smoothing trowel. Remove excess within 15 minutes with a single-disc machine and LOBA fleece cloth, then level the entire surface with LOBASAND Normalpad white.
Floors with more extensive damagemay require treatment with impregnation oil. For more information about such treatment, see the LOBA floor-care instructions for oiled hardwood floors.
For larger areasthe product can be applied using the SprayCleaner method. Spray Oil onto the floor, and buff the entire area using a floor machine fitted with a white pad.Important information
WARNING! SELF-IGNITION:
Store cloths, pads, and other tools contaminated with oil in closed metal container or soak in water immediately after use. Do not leave used rags on jobsite! Do not dispose of with sawdust!Compatibility
When this product is used in combination with other LOBA products the technical information of these products must be followed. Refer to the Technical Data Sheets. LOBA cannot guarantee the suitability of products other than LOBA or the bond of the existing coating to the substrate.
Contact
