- BEFORE USING, READ AND UNDERSTAND ALL LABEL INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS.
- For technical advice call our Loba-Wakol Technical Service at 1-800.230.6456.
Application Tool
LOBA Mop or Scrubber.
Coverage
1000-1250 square feet per 2.5 gallon per coat.
Application:
For regular cleaning and before applying DeckRefresh and WPC Refresh. Depending on the degree of soiling, mix at a ratio of DeckCleaner : water between 1:40 and 1:200. Apply cleaning solution to the surface and remove after a short exposure time with the LOBA mop. In case of grooved terrace decks or heavy soiling, treat the surface with a scrubbing brush. If necessary, repeat the cleaning process. Then rinse off any cleaning agent residues with clear water.
In case of high application concentration, a slight leaching may occur on oiled surfaces. In this case, we recommend a subsequent application of WPC Refresh on these surfaces after drying overnight to restore the impregnation. High application concentrations can lead to leaching of the oiled surfaces. To restore the impregnation, after drying overnight, LOBA WPC Refresh (light impregnating effect) or LOBA DeckOil (strong impregnating effect) can be applied.
Compatibility
When this product is used in combination with other LOBA products the technical information of these products must be followed. Refer to the Technical Data Sheets. LOBA cannot guarantee the suitability of products other than LOBA or the bond of the existing coating to the substrate.
Contact
