- BEFORE USING, READ AND UNDERSTAND ALL LABEL INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS.
- For technical advice call our Loba-Wakol Technical Service at 1-800.230.6456.
Application Tool
LOBA Mop
Coverage
For maintenance cleaning and care cleaning, add 50ml - 1l into 10l of water (mixing ratio of 1:10-1:200). 30-550 square feet per 2.5l container.
Drying time
Maintenance care:For weekly cleaning and care, add approx. 50-100ml (mixing ratio of 1:100-1:200) of LOBA DeckRefresh to 10l of water. Wipe the patio deck using LOBA Mop and the cleaning solution. Allow residual moisture to dry.
Care:Remove loose dirt mechanically. Clean surface with LOBA DeckCleaner according to technical information. Add 1l LOBA DeckRefresh to 10l (mixing ratio of 1:10) water and clean the surface evenly with a LOBA mop. Do not walk on the surface during drying.
Note for wooden decks that are severely worn: LOBA DeckRefresh is only suitable for wooden decks with a largely intact finish coat / oil impregnation and is only to be used for refreshing between the annual renovation cycles. For re-finishing or re-oiling the surface we recommend LOBA DeckOil or LOBA DeckFinish Color.For professional use only!Compatibility
When this product is used in combination with other LOBA products the technical information of these products must be followed. Refer to the Technical Data Sheets. LOBA cannot guarantee the suitability of products other than LOBA or the bond of the existing coating to the substrate.