- BEFORE USING, READ AND UNDERSTAND ALL LABEL INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS.
- For technical advice call our Loba-Wakol Technical Service at 1-800.230.6456.
- Do not apply to surfaces exposed to hot or strong sunlight, as the applied coating may dry too quickly. Do not apply if rain is expected within 3 hours of application.
Application Tool
LOBA Spray Can, Wischwiesel, Trim pad, or cloth.
Coverage
340-1000 square feet per 1 quart bottle.
Drying time
- Careful use possible after 4-6 hours.
- Full traffic and furniture placement after 12 hours.
Application:
Clean surface dust and debris (sweep, vacuum). Remove dirt by damp mopping with the LOBA DeckCleaner. When completely dry, apply LOBA WPC Refresh thin and evenly with a lint-free cloth, LOBA Wischwiesel, or TrimPad. After a short reaction time, level out the excess without leaving any residue.
Larger surfacesCan be applied by the spray/buff method. Apply LOBA WPC Refresh using a manual pump sprayer and buff using a thick white maintenance pad.Important information
WARNING! SELF-IGNITION:
Store cloths, pads, and other tools contaminated with oil in closed metal container or soak in water immediately after use. Do not leave used rags on jobsite! Do not dispose of with sawdust!Compatibility
When this product is used in combination with other LOBA products the technical information of these products must be followed. Refer to the Technical Data Sheets. LOBA cannot guarantee the suitability of products other than LOBA or the bond of the existing coating to the substrate.
Contact
